Filter
Top Products
To assign Automatic 1 At Action = , enter 101.
Intercom (AUTO ICOM)
[AG] (This is a two-
2 At
Data = , enter 8.
station feature. ) 3 You see the prompt,
Action = 102.
4 At Data = , enter the called station’s PDC.
5 You see the prompt,
Action = 103.
6 At Data = , enter the called station’s Automatic Intercom
button number.
To assign a Data button
1 At
Action = , enter 101.
[AG]
2 At Data = , enter 9.
3 You see the prompt,
Action = 102.
4 At Data = , enter the DDC of the associated data station.
To assign a Call Coverage
1 At
Action = , enter 101.
Group “Receiver” button
(COVER-GRP) [AG]
2 At
Data = , enter 10. †
3 You see the prompt,
Action = 102.
4 At Data = , enter a coverage group number (1-32).
5 You see the prompt,
Action = 103.
6 At Data = , enter 1 to enable ringing (strongly
suggested), 0 otherwise.
To assign Send All Calls
1 At
Action = , enter 101.
(SEND ALL CALLS) [AG]
2 At
Data = , enter 11. †
3 You see the prompt,
4 At
Data = , enter 1
0 otherwise.
Action = 102.
to enable single ring reminder,
† This feature is not administrable on a SLAC.
10-8 Administering Button Assignments