Filter
Top Products
Assigning Trunk Options to a SLAC System
The following options apply only to systems using the Switched Loop Attendant Console
(SLAC), and are not administerable for DID trunks:
To set the priority of a 1 At
Action = , enter 11.
trunk to ring in the
2
At Data = , enter a trunk priority number, 0-7:
attendant-console queue
■
1 - highest priority
■
7 - lowest priority
■
0 - the trunk won’t ring in the queue
The default is 0.
Specify which attendant
1 At
Action = , enter 12.
should receive calls from
this trunk
2 At
Data = , enter the attendant position number, 0-2:
■
1 - first attendant
■
2 - second attendant
■
0 - either attendant
The default is 0.
Display Support
To assign or remove
trunk Display ID
a
Note This feature is not administerable for DID trunks.
1 At
Action = , enter 90.
2 At
Data = , enter the Display ID (not more than 11
characters, enclosed in double quotes), or “” to remove
the ID.
Administering Trunks 5-7