Filter
Top Products
TABLE 16-19 System Administration (Menu=4) (continued)
ACTION
DESCRIPTION
DATA
82
Switched Loop Attendant system: Queue
[group number (1-32),
should act as coverage receiver for which
0 for NONE]
call coverage group?
83
Switched Loop Attendant system: Length
[10-255;
20]
of hold timer (seconds)
84
Switched Loop Attendant system: DID
[PDC]
access code to receive “0” treatment (PDC
format, no leading zeros, can’t exist in
system number plan prior to this)
85
Switched Loop Attendant system: Enable
[1=Y /
0=N]
automatic hold feature?
86
Switched Loop Attendant system: Should
[1=Y /
0=N]
calls return to the common queue after
second hold timer expires?
87
Single-position Switched Loop Attendant
[PDC]
system: PDC of station serving as coverage
when the attendant is in POS BUSY mode
(PDC/station must already exist)
90
Dual-position Switched Loop Attendant
[0=neither,
system: Which attendant should take on
1=1st Att.,
default message center-like characteristics?
2=2nd Att.]
(see Table 16-21)
91
Switched Loop Attendant system: Enter
[1-8; see Table 16-20]
call type code:
92
Switched Loop Attendant system, Must
[0-7; 4, 0=calls
have selected call type via Action 91: Enter
disallowed/ or
call type priority:
1=highest priority,
thru 7=lowest priority]
93
Switched Loop Attendant system, Must
[0-2; see Tables 16-20
have selected call type via Action 91, (If
& 16-21; 0=either Att.,
call type codes 2 and 6: NOT
1=1st Att., 2=2nd
ADMINISTRABLE) Which attendant
Att.]
should receive this type
call?
16-24 Command Reference