Filter
Top Products
Set Baud Rate and Parity
Note For each data terminal, indicate all permissible operating
speeds and any required parity.
To auto-adjust baud rate
1 At
Action = , enter 61. ‡
on call origination
2 At
Data = , enter 1 for yes or 0 for no.
The default is 1 for DLC and 0 for STARLAN CP.
Can this terminal operate
1 At
Action = , enter 62. ‡
at a low data rate?
2 At
Data = , enter 1 for yes or 0 for no. The default is 0.
Can this terminal operate
1 At
Action = , enter 63. ‡
at a baud rate of 300 bps?
2 At
Data = , enter 1 for yes or 0 for no. The default is 1.
Can this terminal operate
1 At
Action = , enter 64. ‡
at a baud rate of 1200
bps?
2 At
Data = , enter 1 for yes or 0 for no. The default is 1.
Can this terminal operate
1 At
Action = , enter 65. ‡
at a baud rate of 2400
bps?
2 At
Data = , enter 1 for yes or 0 for no. The default is 1.
‡ This is a Read-Only feature for the STARLAN CP
Administering Data Line and STARLAN CP Ports 8-7