Filter
Top Products
Paging (Associated with CO Trunk Port)
If the paging system is connected to a loop or ground start trunk port, simply assign a trunk
facility access code for the port(s) so connected.
DGC Delay Announcement
To assign DGC Delay
1 At
Action = , enter 1.
Announcement
2 At
Data = , enter 255.
Directed Night Service Delay Announcement
To assign Directed Night
1 At
Action = , enter 1.
Service Delay
Announcement [AG]
2 At
Data = , enter
■
251 (Delay Announcement #1)
■
252 (Delay Announcement #2)
Assign number of rings before delay announcement
1 You see the prompt:
Action = 2.
2 At Data = , enter the number of rings before an
unanswered call receives delay announcement (1-15).
Music-on-Hold
To assign Music-on-Hold 1 At Action = , enter 1.
[AG]
2 At Data = , enter 254.
3 Special Hold: A caller is placed on Special Hold when a
multiline set user presses either Transfer or Conference.
You need to indicate whether or not callers will hear music
during the short interval when they are on Special Hold.
(continued)
Administering Auxiliary Equipment 6-3