Filter
Top Products
Assigning Message-Center-Like Defaults
To specify which
1 At
Action = , enter 90.
attendant console should
have message-center-like
2 At
Data = , enter
operation (for dual-SLAC
■ 1 for the first attendant
systems only)
Setting
Follow
■
2 for the second attendant
■ 0 for neither attendant
The default is 0.
Call-Type Options
the procedures below for each call-type priority you want to change
Note When you change a message-center-like default, the data value for Action=90
reverts to 0. The rest of the message-center-like values, the defaults (see Table 9-2)
and those you’ve changed, stay the same. Do not respecify an attendant with
Action=90 unless you want to revert to the original set of message-center-like
defaults.
To specify a call-type
1 At
Action = , enter 91.
priority
2 At
Data = , enter the call-type code, 1-8. See Table 9-1.
3 Type a, and at
Action = , enter 92.
4 At
Data = , enter the priority for this call type, 0-7:
■
0 = calls disallowed
■ 1 = highest priority, with 2, 3,...6 following
■ 7 = the lowest priority
The default is 4.
(continued)
9-10 Administering Attendant Equipment