Filter
Top Products
To allow toll restricted 1 At Action = , enter 31.
stations to make toll calls
2 At
Data = , enter 1 for yes or 0 for no. The default is 1.
within your area code
Specify whether your CO 1 At
Action = , enter 32.
requires you to dial “ 1”
before dialing calls outside
2 At
Data = , enter 1 for yes or 0 for no. The default is 1.
your area code
Specify whether your CO 1 At
Action = , enter 33.
requires you to dial “1”
before dialing toll calls
2 At
Data = , enter 1 for yes or 0 for no. The default is 0.
within your area code
To check toll restrictions
1 At
Action = , enter 34.
on calls made over inter-
PBX trunks (trunk type
2 At
Data = , enter the single-digit CO access code of the
805) that start with one
other PBX, 1-9 or 0 for none. The default is 9.
specific digit
Call Coverage Options
From the Main menu prompt, enter 4, then set the following
Call Coverage options:
To set call coverage 1 At
ringing on internal calls
2 At
■
■
Action = , enter 40.
Data = , enter:
1 to provide call coverage ringing on internal calls.
0 if you do not want to provide this call coverage
option.
The default is 1.
4-2 Administering System-Wide Options