Filter
Top Products
To assign ARS Facility
1 At
Action = , enter 15.
Restriction Level (FRL)
2 At
Data = , enter the FRL number, 0-3, from the following
list (the default is 3):
Level
Allowed FRL Pools
0-0
1 - 0,1
2 - 0,1,2
3 - 0,1,2,3
To enter an associated 1 At
voice/data station
2 At
■
■
Action = , enter 21.
Data = , enter:
the PDC or DDC of the associated station. See
Action=22 next to restrict Third-Party Call Set-Up to
just this associated station.
0 for none; either to allow this terminal to dial calls
for any voice/data station, or to totally disable the
feature for this terminal. See Action=22 next.
Note This action is not administrable for the STARLAN CP;
the value is fixed at 0.
To restrict Third-Party 1 At
Action = , enter 22.
Call Set-Up so the user
can only establish calls
2 At
Data = , enter:
for the associated station
■
1 to restrict Third-Party Call Set-Up to just the
associated station specified with Action=21, or to
totally disable the feature for this terminal (if you
entered Data=0 for Action= 21).
■
0 to allow this terminal to call any endpoint station,
or to enable this feature for a STARLAN CP.
The default is 1.
8-6 Administering Data Line and STARLAN CP Ports