Filter
Top Products
To assign Position Busy
Note For a DTAC, this feature can only be administered when
(POS BUSY)
there are two attendant consoles. For a SLAC, this feature
can be administered when there are one or two consoles. For
a system with only one SLAC, see the procedure for assigning
a covering station PDC for the attendant (Action= 87) under
Assign Attendant Options.
1 At Action = , enter 101.
2 At Data = , enter 18.
To assign Attendant
1 At Action = , enter 101
Message Waiting (ATT
MSG)
2 At Data = , enter 19. †
Assigning Selector (DXS) Console Buttons
See the introduction to Administering Button Assignments for a description of button
assignments for the Selector (DXS) Console, defaults, and a brief explanation of the button
functions.
To assign DXS console
1 From the Main menu prompt, enter 1.
buttons, begin with this
2 At
Port = , enter the DXS console location (CSSPP).
step
To assign PDC ranges to
Note There are seven possible DXS console PDC ranges the
the DXS console group
attendant can access with group select buttons.
Action = 21
select buttons
assigns a PDC hundreds group to the first DXS group select
button.
Action = 22 does the same for the second group
select button. You assign the additional PDC ranges using the
numbers 23 through 27 at
Action = .
1
At Action = , enter a number, 21-27.
2 At Data = , enter the hundreds group followed by two
periods. The allowable range is from . . (PDCS from 1
through 99) through 99.. (PDCS from 9900 through 9999).
The defaults are 2.. through 8.. .
† This feature is only administrable for the DTAC.
Administering Button Assignments
10-11