AT&T R1V2 Telephone User Manual


 
TABLE 16-11 Port Administration, Trunks (Menu=1)
ACTION
DESCRIPTION
DATA
0 Physical port number
CSSPP
1 Enter trunk port type code [See Table 16-12]
2
Enter trunk number
[0001-9999; 0001-0104]
3
Assign class-of-service code
[(DID—1-4;
3)
(All other–
See Table 16-13; 8)]
4
Assign pooled facility access code. [Facility access code;
(100,101,102)
0 if trunk not in any group]
5 Allow dial access
[1=Y
/ 0=N]
6 Assign the trunk to a DGC group [1-32; 0 for none]
7
Make this a directed night service trunk
[1=Y
/ 0=N]
8 Assign night service delay announcement
[1 for first announcement,
2 for second announcement,
0 for none]
9 Type of signaling on incoming calls
[1=Tone / 0=Pulse]
(Tie-Trunks only)
10
Determine pooled trunk hunting order of a
specified trunk {Read Only}
11
For Switched Loop Attendant systems ONLY: [0-7; 0=won’t ring in
Priority of trunk to ring in queue† queue/ or 1=highest
priority, thru 7=lowest
priority]
12
For Switched Loop Attendant Systems ONLY:
[0-2; 0=either Att. / 1 = 1st
Which attendant should receive calls from this
Att. 0NLY/2=2nd Att.
trunk?† ONLY]
90
Assign/remove trunk Display ID‡ [”11 characters or less”, or
“” to remove]
† Not administrable for trunk port type codes 901-902 or 1003-1008
‡ Not administrable for trunk port type codes 901-902.
16-14 Command Reference