Filter
Top Products
TABLE 16-9 PORT/PDC Administration, Data Terminals (Menu=1/2)
ACTION DESCRIPTION
DATA
0
Physical port number
CSSPP
1
Enter data type code
[See Table 16-10]
2
Enter DDC
[1-9999;
600-704]
3 Restrict dial access to CO trunk pool†
[1=Y /
0=N]
4 Restrict dial access to all other trunk pools†
[1=Y /
0=N]
12
DDC of station to hunt to next
[PDC; 0 for none]
13
Restrict this station from making outward
[1=Y /
0=N]
calls†
14
Assign toll restriction class†
[1-4; 0 for none]
15
Assign ARS Facility Restriction Level†
[0-3; 3]
21
Enter associated voice/data endpoint station‡
[PDC/DDC or
0 for none]
22
Restrict Third-Party Call Set-Up so user can
[1=Y
/ 0=N]
only establish calls for the associated station
(see Action 21)†
61
Auto-adjust baud rate on call origination. *
[1=Y
/ 0=N]
(The default is 0 for STARLAN CP.)
62
Allow terminal to operate at low bits per
[1=Y /
0=N]
second (bps)*
63
Allow terminal to operate at a baud rate of 300
[1=Y
/ 0=N]
bps*
64
Allow terminal to operate at a baud rate of
[1=Y
/ 0=N]
1200 bps*
65
Allow terminal to operate at a baud rate of
[1=Y
/ 0=N]
2400 bps*
66
Allow terminal to operate at a baud rate of
[1=Y
/ 0=N]
4800 bps*
67
Allow terminal to operate at a baud rate of
[1=Y
/ 0=N]
9600 bps*
68
Allow terminal to operate at a baud rate of
[1=Y
/ 0=N]
19200 bps*
69
Assign this parity setting to correspond with
[0-3; 2]
terminal’s parity setting*
Continued on next page
* Read-only for STARLAN CP.
† If data port type code 1802 (STARLAN CP), default values are relevant for the first installed port on the board. Values assigned
to this action item on any of the four ports will be copied to
all
four ports on this board.
‡ Not administrable for STARLAN CP.
Command Reference
16-11