Filter
Top Products
Administering Auxiliary Equipment
This section discusses how to assign and remove AT&T System 25 auxiliary equipment
associated with special ports. It assumes that you know what special equipment is required
and that you have read the System 25 Implementation Manual for R1V2 and/or the Reference
Manual to understand which circuit boards you require to connect this special equipment.
See the “Special Feature Port Type Codes” table in Command Reference.
For all procedures in this section, you must first specify the port you want to assign.
To assign or remove
1 From the Main menu prompt, enter 1.
auxiliary equipment
options listed in this
2 At
Port = , enter the port number in the form CSSPP.
chapter, begin with this
step
External Alerts (Port Type 253)
To assign an external
1 At
Action = , enter 1.
alert for a station [AG]
2 At
Data = , enter 253.
3 You see the prompt:
Action = 2.
4 At Data = , enter the PDC of the associated station, or 0
for Night Service Alert.
Administering Auxiliary Equipment 6-1