Filter
Top Products
Administering Automatic Route Selection (ARS)
The procedures in this section show you how to define ARS patterns and lists. If you do not
define these patterns and lists, then ARS calls will be routed over the local CO facility. For
more information about making ARS choices, see the Reference Manual.
To administer ARS, begin
1 From the Main Menu prompt, enter 11.
with this step
Assign ARS Access Code Note This dial code accesses ARS routing.
1 At
Action = , enter 401.
2 At
Data = , enter the ARS access code. The default is 9.
Assign ARS pattern for
1 At
Action = , enter 402.
international dialing
2 At
Data = , enter the routing pattern to be used for
international dialing.
The default is 0 (none).
Assign emergency
Up to three seven-digit emergency telephone numbers (ETN)
telephone numbers may be assigned. ARS calls to these numbers are routed over
the local CO facility. No restrictions of any kind are enforced.
1 At
Action = , enter 601, 602, or 603.
2 At
Data = , enter the ETN.
Administering Automatic Route Selection (ARS)
12-1