Filter
Top Products
To assign a DID access
1 At
Action = , enter 84.
code to the SLAC
2 At
Data = , enter the DID access code people outside the
system will use to call the attendant. (PDC format, no
leading zeros, can’t exist in system number plan prior to
this).
To enable Automatic 1 At
Action = , enter 85.
Hold
2 At Data = , enter 1 for yes or 0 for no. The default is 0.
To set calls to return to 1 At
Action = , enter 86.
the common queue after
2 At
Data = , enter 1 for yes or 0 for no. The default is 0.
second hold timer expires
To specify the PDC of the
1 At
Action = , enter 87.
station serving as
coverage when the
2 At
Data = , enter the PDC of a station that is currently
assigned to the system.
The backup station should be a
attendant is in POS BUSY
mode (for single-SLAC
multiline voice terminal with a System Access - Originate
Only button.
systems only)
Note This PDC will be cleared if a second SLAC is added.
Should this SLAC receive
1 From the Main menu prompt, enter 1.
a single-ring reminder
2 At
Action = , enter 61.
whenever a call arrives in
the queue? (Administer
3 At
Data = , enter 1 for yes or 0 for no.
for each SLAC
The default is 1.
separately.)
9-8 Administering Attendant Equipment