Filter
Top Products
4
5
At Data = , enter 0.
If this station is associated with another station(s) for
features such as Call Coverage, Automatic Intercom, etc.,
you will see a warning message for each type of
association. To go on with the action, respond to the
system message,
c for continue, any other key for abort.
When there are no more associations with the station you
want to remove, you see:
NO MORE BLOCKS
c for continue, any other key for abort
Enter c.
You see the following display when the station is
removed:
Action = 1 Data = 0
Note If you remove a station that is associated with other
stations, you may need to reassign features on those other
stations as well.
Changing a Station Dial Code
You can only change a dial code to one that does not conflict with any existing number. For
more information, see the “Dial Plan” description in the System 25 Implementation Manual for
R1V2. To determine if a dial code exists, use the Search function described later in this
chapter.
There are other circumstances that might prevent you from changing a dial code. For
example, the existing station number might be part of a DGC group or call pickup group.
Again, use the Search function to see if the dial code is a member of any group.
To change a station dial
1 At the Main Menu prompt, enter 2.
code
2 At
PDC = , enter the PDC you want to change.
3 At
Action = , enter 2.
4 At
Data = , enter the new dial code.
If you see
Error 7012,
that dial code may already be
assigned.
Administering Voice Stations 7-3