Filter
Top Products
Assign Attendant Options (DTAC and SLAC)
To assign options to an
From the Main menu prompt, enter 4.
attendant console
Assign options to the DTAC or SLAC as described below.
To assign the number of
1 At
Action = , enter 3.
rings before unanswered
calls extended by the
2 At
Data = , enter the number of rings (1-31).
attendant return to the
The default is 5.
console
To allow DID calls
1 At
Action = , enter 4.
coming in to unassigned
DID numbers to ring at
2 At
Data = , enter 1 for yes or 0 for no.
the attendant console
The default is 1@.
To allow calls to FPDCs
1 At
Action = , enter 5.
that are not logged in
anywhere to ring at the
2 At
Data = , enter 1 for yes or 0 for no.
attendant console
The default is 1@.
To assign the number of 1 At
Action = , enter 6.
second; before a camped-
on call returns to the
2 At
Data = , enter the number of seconds (1-120; 0 means
attendant console
camp-on is not allowed). The default is 30@.
@ Strongly recommended this value be used
9-6 Administering Attendant Equipment