Filter
Top Products
To specify the number of
rings before calls are sent
to call coverage or call
following calls return to
their home station
1 At
Action = , enter 41.
2 At
Data = , enter a number between 0 and 31 for the
number of rings. The default is 2.
Pooled Modem Options
From the Main menu prompt, enter 4 then set the following
Pooled Modem options:
To specify the Modem 1 At
Action = , enter 60.
Request Code
2 At
Data = , enter a number between 1 and 9999. The
default is
820.
To set the receiver to
1 At
Action = , enter 61.
respond to remote loop
2 At
Data = , enter 1 for yes or 0 for no.
The default is 1@.
To set disconnect on loss
1 At
Action = , enter 62.
of carrier
2 At
Data = , enter 1 for yes or 0 for no.
The default is 1@.
To set pins CF and CB as
1 At
Action = , enter 63.
common
2 At
Data = , enter 1 for yes or 0 for no.
The default is 1@.
@ Strongly recommended this value be used.
Administering System-Wide Options 4-3