Filter
Top Products
TABLE 5-1 Trunk-Type Codes
If the Trunk Type is:
You Enter:
Ground Start, CO
701*
Ground Start, WATS, FX
702
Loop Start, CO 801*
Loop Start, WATS, FX
802
PBX/Centrex
805†
DID Immediate Dial
901
DID Wink Start
902*
Auto-in/Auto-out
1001
Auto-in/Immediate Dial-out
1002
Immediate Dial-in/Auto-out
1003
Immediate Dial-in/Immediate Dial-out
1004
Wink Dial-in/Auto-out
1005
Wink Dial-in/Wink Dial-out
1006*
Delay Dial-in/Auto-out
1007
Delay Dial-in/Delay Dial-out
1008
* Default Type
† You must select this code for Centrex operation.
Assign a trunk number:
1 You see the prompt,
Action=2.
2 At Data= , enter a four-digit trunk number from 0001
through 9999.
Note Trunk numbers beginning with 9 (”9xxx”) have
special significance when used with Dial-in tie trunks
(types 1003-1008). System administrators should read the
section in the Reference Manual called Tandem Trunking
thoroughly before using any 9xxx-format numbers for tie
trunks.
5-2 Administering Trunks