Filter
Top Products
set to YES, the ‘Rshiba VP System ignores a loss of loop current at the
start of a call for the time
interval
specified in this parameter. If no
line
current is flowing after this time,
the
Toshiba VP System treats this as ‘if
a loop current has been interrupted.
156
APPUCATlON
PROCESSOR MESSAGE POOL
DISTRlBlJTiON
LIST
olhvorks)
157
SPEAK DISCRETE VERSIONS OF NUMBERS
21-
59
Iv
This parameter is used
only
for German language prompts.
158
OFFSlIE
MW CALL LlMlT ABSOLUTE NOT DAILY
L!Y
This parameter works in conjunction with INFORMATION Table Index
14
-
OFF-SlTE
ATTEm
TIMES, which establishes the number of
times per day offsite message waiting notification should be attempted;
If this parameter is set to YES, the number of offsite MW attempt times
does not
restart each day. After the system has tried offsite message
waiting notification the number of times set in INFORMATION Table
Index 14, offsite notification does not begin again until the mailbox is
logged on to and a new message is received.
159
OFFSlTE MW CALLS WORK LIKE INT (DETECT BUSY)
Iu
This parameter works only if network busy is the same as PBX busy.
160
QUICK
BUSY
TEST
tt3’ This parameter is used only in Germany. Could cause caller to be
dropped on false detection of busy.
161
MODEM ACCESS PORT (0 = ALL PORTS OK)
.
.
>
W
If this parameter is set to a non-zero value, modem access is restricted
to the designated port. The designated port could be dedicated to
modem access for security reasons.