Filter
Top Products
SLOTSTaMe
21-11
D
Using
INSTALL
Question number 3 in the INSTALL program prompts for
slot
configuration data, beginning
with slot 1.
m
Line Cards
l
The follo6ing is the II&TAIL
program SLOTS Table question
for line
card slots.
.:-
When information for a port is
the
same information entered for the previous port, only
the extension number of the port need be entered followed
by-].
The information
for the remainder of the line is automatically entered.
[~7
Configure the slots in order; do not skip any slots. For example, you cannot
configure a line card in each of slots 1 and 3, but none in slot
2.
Also, you cannot
add a line card when all ports on the last configured line card have not been
. .
:
defined.
When a line card slot is left empty or partially defined, or if the maximum ports
allowed by the Option Control Chip (OCC) have been configured, the
INSTALL
program skips to slot 9, the firs integration Gird slot.
Toshiba VP
sysl-
Re(eau5.3
by.1Es1