be run from this password level. Reports can be listed and clearexi. Bble entries may be
m&ed, added, or deleted from UPDATE. Only the Admi&tmtive and Report words
may be set at this 1eveL
At the @ prompt type:
PASS A cnew passworb
For example,
@PASS A Wl.743
where ‘WIL?43” is the new Admin&mtive password.
- .
n
Report
This level allows the LLST and CLEAR commands to be used for the Hardware Error ‘IWe,
Pe& and all reports. Neither INSTAU nor UPDATE can be run from this password 1eveL
Only the Report password may be set at this level.
At the @ prompt type:
For ex&nple,
@PASS R AIFU59
where ‘!MFU%” is the new Report password.
The password is requested when a terminal is
cn~ected to
the !+em, when an already-
connected terminal is turned ON, or when the modem is accessed. The password entered at
that time determines the level of access to the system. When a task is mmplete, the terminal
should be disconnected from the modem or turned OFF. This assures that the appropxiate
access level is available for the next session.