Filter
Top Products
34 TRANSFER CALLS WITHOUT CHECKING
FOR BUSY OR NO ANSWER
(May be assigned to PORlJ
The Toshiba VP System automaticaliy makes an unscreened transfer to the called
extension when a COS has this attribute. This allows the Toshba VP System to
offer callers the option of %unping-+n” to a busy extension in mrne PBXs.
. ‘:
DI Not all PBS allow transfer to busy exten&ns. Some may permit it, bat it is
.::
not desirabIe (caller hears busy until they &oose to
disco~ec!tJ This is
speciGically designed for PBXs offering the ability to camp-on by ‘?skning”
to busy tone for a certain amount of time.
:
38
PORT REQUIRES AN ACCOUNT CODE/hWLBOX IS AN ACCOUNT
CODE
(Incoming Call Restriction - Accounl Codes) (May be assigned to PORT)
When this attribute is assigned to a port, an Account Code is required before the
port can be used for calling extensions, logging on, or leaving quick messages
When assigned to a maiRxx the mailbox becomes an Account Code. Ma&axes
with this attribute cannot receive messages or be logged on to. Refer to the F&WC
De.sc+& manud - INCOMING CALL RESlXICl”ION.
.,%, .c
..-
37
DO NOT CHECK USERS TABLE FOR ACCOUNT NUMBER
(Incoming Call Restriction - Account Codes) (May be assigned to PORT)
When this attribute is assigned, the Account Code entered does not have to bein
the USER %ble. The Account Code is not checked, it is just sent to the PBX..
38
SEND EXTENSION/MAILBOX
TO
PBX
BEFORE CAWNG
(incoming Call Resktion - Account Codes) (May be assigned to PORT)
When this attribute is ass@ed, the called mailbox or extension .&its are sent to
the PBX according to the following rule.:
l
If an extension number is associated with a mail& the extension number is
sent to the PBX.
l
If there is no extension, the digits the caller entered (the mailbox number) are
sent to the PBX.
System Parameter 128 interacts with Attribute 38 by either defining the maiIbox as
the digits always sent to the PBX (l2.8-YES) or allowing the extension to be sent, if
it exists. (12%NO).
HZ%EXt
Yes
Yes
No
Sys Par 128
YeS
No
Yes/No
Send to PBX
MaiIbox
Extension
MaiIbox
39
MAY NOT CALL OPERATOR BEFORE
ACCOUNT
CODE IS ENTERED
(Incoming Call Restriction - Account Codes) (May be assigned to PORT)
When this attribute is assigned, the attendant can not be c&d unless an Account
Code is entered. The prompt says “G&+e”if an attempt is made to call the
attendant without entering an Account C&e.