Filter
Top Products
SLOTS Table
a-7
Ifl
Some
PBXs
have the capability of running diagnostics on their
pass.
The
diagnostic
may
cause
the VP
3lOdW
300%
self&t
tofailandplacetheVP3OOsNP3OOportinTSTmode,taking
.
the port out of service. The port remains in TST
mcde
until
selftestrunsagainandisabletoputtheportinse~or,
.:
until the system is restarted. In these cases, selftest can be
disabled.
This
problem has been identified on the Old
Disc&er
III and
the Ericsson Prodigy. ‘Ihis field should be YES unless you
have consulted with your technical support group.
H
Integration Cards
The slots for integration cards define the type of integration card, including configuration
information for each integration unit on each card.
The following explains each
integration
card entry in the SLOTS Table:
SLOT Specifies the slot number.
CARD
TYPE
.Specifies
the type of integration card installed.
INTEGRATlON
UNIT
--sSpecifies
which unit on the integration card is being configured.
Each
integration card is divided into two integration units.
Each
integration
unit has two links.
UNE APPEARANCES Lists the system port numbers assigned as line appearances for call
processing on the integration unit.
MESSAGE WAITING
LINK
Specifies whether or not the link is enabled for message waiting
notification.