Toshiba VP 300S Answering Machine User Manual


 
22-l 6
Configuration
hb-ud
-
This parameter applies to messages left after calling a busy and/or no answer
extension, messages
kft
after greeting, quick messages (IntraMessaging option)
and scripted prompt responses
(Saipted
Prompting option).
75
SUBSEQUENT SILENCE MAX SEC (QUICK/SCRIPTED)
76
77
PBX PROVIDES MOMENTARY DISCONNECT
78
79
80
LAMP MW: ‘ON”
POST-UCIENSION
DIGITS
This parameter applies to messages left after calling a
busy
and/or no ahswer
extension, messages left
after greeting, and Quick Messages (IntraMessaging
option) and Scripted
Prompt responses (Scripted
Prompting option).
NOVICE PROMPT KEYPAD-COMMAND USAGE
UMIT
When this parameter is set to YES, if a
caller hangs
up and the PBX provides a
momentary interruption in the loop
curfent greater
than 50 millkeconds, the
called port is disconnected
and the call
is
terminated.
If this parameter is set to YES and Adaptive Integration is installed, when a call
forwards to a mailbox, the caller hears “Mailbox ruu&~lnryne
does not answerlis
busylis
wzavailabIt~
P&se
hve
a
pivate
trzessw
at the tone,
diai’anoth
tz&mion,
or
my
on the line for arsktance
If the caller stays
on the line after leaving a
message, the Toshiba VP System automatically sends the caller to as&stance.
If this parameter is set to YES, but the PBX does not provide momentary
disconnect, the Toshiba VP System attempts to transfer a call even when the
caller hangs up. Depending on the PBX, this may result in phantom
calLs
to the
attendant.
PBX PROVIDES STUTTER DIAL TONE
This parameter cannot be modified.
LAMP
MW: “ON”
PRE-EXfENSION
DIGITS