Filter
Top Products
f
E
Press ITCM
++
# 7 4 6
t
for base level.
FEATURE DESCRIPTION
Flexlble Station Numberlng:
The
;ystem supports a flexible station
numbering plan for calling individual
stations and departments. Each station
:an be programmed to respond to the
dialing of any available number between
10 and 7999; however, the same dialing
zode cannot be assigned as both a
station extension number and a
department access code, nor will the
system allow an extension number or
access code conflict such as 15 and
1500 to be assigned.
Direct Department Calling (Access
Codes):
Department access codes can
be programmed to be any number
between 10 and 7999; however, the
same dialing code cannot be assigned
as both a station extension number and
a department access code nor will the
system allow an extension number
conflict such as 15 and 1500 to be
assigned. Further, with system defaultet
extension numbers, assigned
department access codes must start at
0058 or larger.
NOTE: See page
4-
18 for line
assignment and page
4-3
1
for station assignment
ENTRY CODE AND PROMPTING DISPLAY
1. Dial 52.
“ACCESS CODE
”
2. Dial
1
to assign Ext no.
“ASSIGN EXT. NUM.”
3. Select station number:
“EXT. xxxx
”
-Station
lo-57=
Dial10-57
4. Dial new ext. number.
“HT. xxxx
YYW
VI
NO773 Extension number can be max. of four digits.
If fess than four digits, leading zeros must be
tiaied before number.
Example: For ext no. IS, dial 0015).
5. Select next station number and assign ext. no.
-OR-
Dial
t
for configuration mode.
1. Dial 52.
“ACCESS CODE
”
2. Dial 2 to assign access codes to depts.
“DEPT. CALLING
”
3. Dial
1
-
4 for dept. 1
-
4.
“DEPTX
WYY
”
4. Dial new access code.
“DEPT
X
YYW
ZZ
NO773 New code can be max. of four digits.
If less than four digits,
lea&g
zeros must
be daled before number. Code cannot
conflict with station extension numbers.
5. Dial next department number and program
access code.
-OR-
Dial
f
for next access code feature.
-OR-
Dial
*
+
for configuration mode.
iEFERENCE RECORD
DFPARTMENT ACCESS CODF
11
71
31 41
DEFAULT
q
NOT AS’GND
I
Press SPKR to end.
I