Filter
Top Products
DATA PRINTER SERVICE
When a data printer is connected to the system, the station message detail record (SMDR) for the system is printed automatically without any
programming or user intervention.
The data printer can also be commanded to print the configuration data for the system.
Partial or complete printouts can be obtained as desired.
When the printer is being used to print the configuration data or SMDA information, SMDR printout is temporarily halted. The SMDR data
collection is continued by the system during this time, but if more than two calls are logged for any one line, call records may be lost.
FEATURE DESCRIPTION
ENTRY CODE AND PROMPTING DISPLAY
Base Level:
The first step In any Press
ITCM.
Dial
+R
# 7 4 6
*.
programming sequence is to enter the
base level. Once in this mode, the
printing of configuration data can be
commanded.
Enable data prlnter
opmtlon
,
1. Dial
91.
2. Choose configuration:
Dial
1
to
print
all configuration data.
Dial 2 to print system data.
Dial 3 to print line data.
Dial 4 to print data for all stations.
Dial 5 to print data for selected station.
Select station to be printed.
-
Dial
lo-57
for stations 10
-
57.
“PRINT
CONFIG.
”
“PRINT ALL
”
“PRINT SYSTEM
”
“PRINT LINES
”
“PRINT STATIONS
”
“PRINT STA.
n
“PRINT STA. XXX
”
Dial 6 to print toll restriction assignment.
Dial 7 to abort printing
Dial
+
for configuration mode.
“PRINT TOLL
”
“ABORT PRINT
”