Filter
Top Products
Press
ITCM
‘Ik
#
7 4 6
*
for base
level.
f
a
STATION
MFSSACF
I’IFTAII
AC?COl
INTING
RFPORTING
-.
-.
.-..
,..---CI--
II..
..-
.x----..
.
..w-
.
--.
-.
-.
I.
--
Five different call cost reports can be produced by the system for printing. They are:
1. Detailed report of all station
2. Detailed report of
all
accounts
3. Trunk summary report
4. Department summary
reporl
5. All records
Reports are generated automatically for printing whenever the system detects that the records storage area
is ninety-five percent full. The reports to
be printed are chosen by programming action and are printed in the order of selection. The system can be programmed for these reports to be
generated automatically for printing at a certain time each day. Programming action can also be taken so that all printed records are then deleted
except for those collected during the printing operation. These are stored for later printing.
“SMDA
PROGRAMMING”
al 04 to define department numbers.
“SMDA
DEPARTMENTS”
that SMDA call cost reports can be
3. Dial
1
-
6 for dept. 18.
“DEPTX
-
produced on a department by departmen
basis.-.
4. Dial 0000
-
9999 for department number.
“DEPTX
YYYY
”
NOTE:
Each station in the system can
5. Dial
+
for next department, and repeat steps
be assigned
to
a department for
3
-
7 until all departments are numbered.
call costing purposes a/though
6. Dial
+
%
for next SMDA feature.
no assignment is required.
7. Dial
+N
+Ic
+Ic
for configuration mode.
Refer to the procedure given on