Filter
Top Products
DigiTech System Software Enhancements TAB 099
FEATURE
Account
Codes (cont.)
BENEFITS
To display a list of stored emergency numbers,
l
Enter
1
7 (if there are no emergency numbers already stored, the system will respond
“Table is Empty”)
To return to the previous menu during programming,
l Enter 1 8
To print out all information pertaining to account code programming,
l
Enter COS programming
l
Enter
1
for System COS
9
Enter 6 for COS Data Printout
l
Enter 7 for Toll Restriction Data Printout; the system will print the status of the
following parameters:
Verified/Non-Verified
Account Code Length
Verified Account Code Length
Account Code Display Duration
Account Code Display for Incoming -- Enable/Disable
Account Code Display for Outgoing -- Enable/Disable
Emergency Numbers
Valid Account Codes
l
Enter 5 for All Station COS Data Printout; the system will print the status of “Forced
Account Code at Station”
Note: If Account Code Length is greater than eight d@its, SMDA reports by
station and by account will print in a two-line format. Also, SMDR and
SMDA reports will include the Caller ID number in the number field for
incoming calls. The Caller ID number will be .preceded by a slash to
distinguish it from outgoing digits.
Support for
Caller ID Service
GENERAL INFORMATION
Caller ID data is sent from the Central Off ice along lines assigned to the Caller ID service.
Caller
ID information is displayed at a station only if the station is assigned to the Caller ID service, and
then only for Caller ID lines at that station which:
l ring audibly
l
are answered by pressing the ringing line
.
are transferred to the station
Caller ID data for a call is received at a station between the first and second rings. Through
programming, you can enable the first ring for a line assigned to Caller ID to be either audible or
silent. Selecting the “silent” option insures that the Caller ID data is displayed prior to ringing,
which nearly eliminates the loss of Caller ID data due to premature answering.
AUTOMATICALLY DIALING CALLER ID NUMBERS
Station users may automatically retrieve and dial the last Caller ID number displayed at a station
by using a preprogrammed SAVE recovery button. Because you can store the local area code
and up to 100 local office codes, ten-digit Caller ID numbers can automatically be transformed
into a dialable format (seven-, eight-, and eleven-digit Caller ID numbers are already dialable and
do not need to be transformed).