Filter
Top Products
.c
d
Press ITCM % # 7 4 6
f
for base level.
I
FEATURE DESCRIPTION
Nlght Transfer
(of ringing): The
attendant can place the system into the
night transfer (of ringing) mode of
operation. While in this mode, special
line/station ringing assignments are
enabled.
NOTE: See night transfer of tinging on
page 4-37 for line/station
ringing assignments
MUSIC
on Hold:
Music is provided to
outside lines that are placed on hold if
an external music source is connected
to the system. Music on hold can be
disabled by attendant action.
LCD Messaglng: A
message can be
set at any system station and displayed
by any LCD speakerphone that calls it
on the intercom line. Two standard
messages are provided for use but the
attendant can create up to 10 custom
messages if needed.
ENTRY CODE AND PROMPTING DISPLAY’
1. Dial 03.
“NIGHT XFER XXX
”
2. Press Al to toggle between enable and disable
(LED On = Enabled).
-OR-
Dial
1
to enable
(Al LED on).
“NIGHT XFER ON
”
Dial 2 to disable.
“NIGHT XFER OFF
”
3. Dial
++
for configuration mode.
1.
Press 04.
“MOH
XXXXXXXX
”
2. Press
Al to
toggle between enable and disable
(LED On = Enabled).
-OR-
Dial
1
to enable.
“MOH
ENABLED
”
(Al LED on).
Dial 2 to disable
“MOH
DISABLED
n
3. Dial
%
for configuration mode.
1. Dial 05.
“LCD MESSAGES
n
2. Dial
1
-
0 for message number.
“XXXX...
”
3. Dial
#
to clear current message.
4.
Refer to Table 4-l (page 4-21),
and compose message (16 digits max.).
5. Dial all
twodigit
codes necessary to enter
the message.
“YWYYYY...
-OR-
Dial
10
for pre-programmed message
“BACK AT
-OR-
Dial 20 for pre-programmed message
“CALL
6. Dial
&
for next message location and
repeat steps 2
-
5.
7. Dial
t
t
for configuration mode.
n
I,
I
REFERENCE RECORD
ENABLE 1 DISABLE
DEFAULT
=
DISABLED
ENABLE 1 DISABLE
DEFAULT
q
ENABLED
r
Press SPKR to end.
I