Filter
Top Products
f
0
LINE CONFIGURATION
1
Mark the desired selections in the charts to record programming needs.
1
Dial the feature code and then dial the selection code or press the programming button to program the selection.
JOTE: A current program setting is indicated b
cr
a lighted LED next to the programming button for that selection.
When a toggle (on/off) action is
provided by a
&g/e
button, the lighte LED indicates an active feature.
1
To make a line port selection, press a programming button or dial a selection number on the keypad as follows:
LINE
PROG. BUTTONS
KEYPAD BUTTONS
I-
14
Al
-
Al4
01
-
14
15,16 Bl,
82 15,16
17
-
24 HOLD plus Al
-
A8
17-24
NOTE HOLD button is used to toggle program buttons between lines 1
-
14 and 17
-
24.
Llne
Defautt:
The line configuration
features, described in the following
procedures, can be defaulted to a
standard set of values. These values
will provide satisfactory system
erformance in a broad range of site
“LINE DEFAULT
”
2. Press # to default line features.
System automatically returns to base level.
Llne
Disable:
A line port can be taken
out of service because of defect or 2. Select line ports to be disabled
other reason. Return the line to service
(LED On = Disabled).
with the central office lines
Line port 1-14 = Dial
01
-
14
or Press
Al
-
Al4
programming procedure.
Line port 15,16 = Dial
15,16
or press
Bl,
82
Line port 17-24 = Dial 17
-
24
D then press
Al
-
A8.
3.
Dial
%
for configuration
mo