Filter
Top Products
Press ITCM
%
# 7 4 6
+#
for base level.
FEATURE DESCRIPTION
ENTRY CODE AND PROMPTING DISPLAY
rone
or
Voice
Slgnalllng:
Intercom
:alls can be tone signalled or voice
signalled. The first choice in
SignaIling is programmable.
Delete Statlon Message Detall
Accounting
(SMDA) records by
Attendant:
When SMDA records
exceed storage capacity, they must
be deleted
to
make mom for more.
The attendant can be allowed to
delete these records if enabled by this
programming step.
D
O
Not
Disturb
(DND) Inhlblt:
Any
station can be set to a DND condition
which cannot be overridden by a
caller unless calling station is
programmed for DND override. The
DND feature can be disabled by this
programming.
NOTE:
Also program a button as the
DND button. See page 4-44.
1. Dial 16.
“XXXXX ANN. FIRST
2. Press
Al
to toggle between Voice
To
Tone.
(LED On = voice signalling).
-OR-
Dial
1
for Voice First.
“VOICE ANN. FIRST
Dial 2 for Tone First. “TONE ANN. FIRST”
3. Dial
*
for configuration mode.
1. Dial 18.
“ATTN DELETE XXX
”
2. Press
Al
to toggle between enable and disable
(LED On = Enable).
-OR-
Dial
1
to Enable
“ATTN DELETE ON
u
(Al LED On).
Dial 2 to Disable
“ATTN DELETE OFF
”
3. Dial
k
for configuration mode.
1. Dial
19.
“DND
XXXXXXXX
w
2. Press
Al
to toggle between Enable and disable
(LED On = Enable).
-OR-
Dial
1
to Enable
“DND
ENABLED
”
(Al LED ON).
Dial 2 to Disable.
“DND
DISABLED
”
3. Dial
%
for configuration mode.
REFERENCE RECORD
SIGNALLING
1 VOICE
ITONEj
DEFAULT
=
VOICE
DISABLE
1
DEFAULT = DISABLE
ID0
NOT DISTURB
INHIBITi
IENABLED
I
J
DISABLED!
DEFAULT
=
ENABLED
Press SPKR to
end.