Filter
Top Products
ANALOG TERMINAL INTERFACE
The Analog Terminal Interface (ATI) device is an optional accessory available for use with the digital telephone system. Connect it to a station port to
lrovide interfacing for such external telephony equipment as an ExecuMail system, an industry-standard model 2500 tone dial telephone, a model 500
‘otary dial telephone, etc. Perform the following programming actions as necessary when operating external equipment through the ATI device.
Press ITCM
3F
#
7 4 6
t
for base level.
FEATURE DESCRIPTION
Automatic Transfer of Voice Mall:
When ExecuMail Is included with the
system, use this programming feature
to arrange for a immediate line transfer
without delay from ExecuMail to a
station port.
Voice Mall Llne ID:
When ExecuMail
is included with the system, program
the lines with identification (ID)
numbers. These numbers allow the
ExecuMail system to identify which line
it is answering. The ID numbers that
are assigned here must match the ID
numbers that are selected as part of
ExecuMail system programming.
ENTRY CODE AND PROMPTING DISPLAY
1. Dial 25
“V MAIL AUTO XFER”
2. Press
Al
to toggle between enable and disable.
(LED On = Enable)
-OR-
Dial
1
to enable.
(Al LED is on)
Dial 2
to
disable.
3. Dial
t
for configuration mode
1. Dial 43.
“VOICE MAIN LN ID”
2. Select line port (LED On = Line assigned)
Line port 1-14 = Dial
01
-
14
or Press
Al
-
Al4
Line port 15, 16 = Dial
15,16
or press
Bl,
82
Line port 17-24 = Dial 17
-
24
-OR-
Press
HOLD
then press
Al
-
A8
3. Dial #to clear current ID.
4. Dial ID number (8 digit maximum).
5. Dial
%
for further ID assignment.
-OR-
Dial
t
f
for configuration mode.
REFERENCE RECORD
I
Press SPKR to end.
I