Filter
Top Products
SYSTEM CONFIGURATION
Mark the desired selections in the charts to record programming needs.
Dial the feature code and then dial the selection code or press the programming button to program the selection.
IOZE: A current program setting is indicated by a lighted LED next to fhe pmgramming button for fhaf selection.
When a fcggfe (on/ofl) acfion
is provided by a sing/e button, the lighted LED indicates an active feature.
eEATURE DESCRIPTION
base
Level: The
first step in any
rogramming sequence is to enter the
ase level. Once in this mode, any
esired configuration can be set.
Iystem
Defauft:
The system
onfiguration features, described in
?e
following procedures, can be
lefautted to a standard set of values.
‘hese values will provide satisfactory
ystem performance in a broad range
If
site applications.
fnanswered
Call Transfer Recall
‘Ime:
A transferred call that remains
Inanswered after a programmed
?ngth of time will return to the
ransfening station for answering.
ENTRY CODE AND PROMPTING DISPLAY
Press
ITCM
Dial
+#
7 4 6
+k
1. Dial
10.
“SYSTEM DEFAULT”
2. Press
#to
default system features.
1. Dial
11.
“TRANSFER RECALL
”
2. Dial
1
(sta xfr recall).
“STA XFR RCL XXX
”
-OR-
Dial 2 (dept xfr recall). “DEPTXFR RCL XXX”
3. Choose transfer time.
-
Dial 1 or Press
Al.
5TA
XFR RCL
70
”
-
Dial 2 or Press A2.
“STA XFR RCL 20
”
-
Dial 3 or Press A3.
“STA XFR RCL 25
”
-
Dial 4 or Press A4.
“STA XFR RCL 30
”
-
Dial 5 or Press A5. “STA XFR RCL 45
”
-
Dial 6 or Press A6.
5TA
XFR RCL 60
”
-
Dial 7 or Press A9.
“STA XFR RCL 90
”
-
Dial 8 or Press AlO. ‘STA XFR RCL 120
”
-
Dial 9 or Press
Al 1.
‘STA
XFR RCL
780
”
-
Dial 0 or Press A12. “STA XFR RCL 400
”
4. Press
t
for next transfer recall feature.
5. Press
+k
&for
configuration mode.
REFERENCE RECORD
Press SPKR to end.