Filter
Top Products
MI 66-083
System Operation
.,
RECALL/FLASH
FLASH
PBX,
CENTREX
and custom calling services may
require this feature.
If a system has been conflgured for flash,
l
Press
TAP
to generate a timed flash signal.
RECALL
This feature provides disconnect and dial tone recall.
If a system has been configured
for
recall,
l
Press
TAP
to disconnect current call and receive a
new dial tone for another call.
NOTE: A system can be configured for either flash or
recall but not for both.
PAGING
EXTERNAL PAGING
Requires external paging unit.
l
Ltft
handset.
l
Press
ITCM
then dial 89.
-OR-
l
Press programmable button programmed for paging
access.
l
Make paging announcement and hang up.
ALL-CALL AND ZONE PAGING
To
paw,
l Lii handset.
l Press
ITCM.
l
Dial zone number
-
(84,85,86,
or 87 for all-call).
l
Make announcement.
l
Hang up handset or wait on line for an answer.
MEET-ME PAGE (Answerback of Page)
To answer all-call or zone page from any
telephone,
l Lii handset.
l
Press
ITCM.
l Dial 88.
0
Meet paging party on line for private conversation.
DO NOT DISTURB
To
activate
(silence
statlon rlnger and appear busy
to Intercom calls),
Through class of servlce programmlng, a statlon
can be allowed to override a do not disturb (DND)
condltlon
at another statlon.
l
Press programmable button pre-programmed for
this purpose. (Associated light will turn
on).
NOTE: The calling party will hear two quick tone
bursts every 1.5 seconds. The feature cannot
be overridden by the calling party.
If DND overrlde Is allowed,
l
Make intercom call and hear busy signal.
l
Dial
G+
09. An intercom call rings at the called
station.
To cancel,
l
Press programmable button again. (Associated
light will turn off
.)