Filter
Top Products
System ‘Operation
IMI 66-083
SAVED NUMBER
REDIAL
The first 16 digits of the last manually dialed number
can be saved for later redial.
To dial a saved number,
l
Lii handset. Listen for dial tone.
l
Press HOLD then press pre-programmed
To
save the number,
l
Press programmable button designated by class
Of
service programming for this purpose.
programmable button.
HOLDING CALLS
MANUAL HOLD
To place call on hold,
l
Press
HOLD.
Status light will flash for line calls.
Intercom hold causes intercom light to flash
To retrieve held call,
l
Press button with flashing light.
-OR-
.
For line calls, press
TAP
if station does not have
line appearance.
EXCLUSIVE HOLD (Only your telephone can
retrieve held cell.)
l
Press
HOLD
twice.
HOLD RECALL FEATURE
After a preprogrammed length of time, a call placed on
hold will automatically ring back to the telephone
which placed it on hold. If the call is on exclusive hold,
it will revert to manual hold after the hold recall time
period. The call can then be retrieved by anyone with
that line appearance.
DIRECT STATION HOLD
To
place a call on direct hold (park a call at a
particular station),
l
While on line, press
ITCM
(outside call placed on
hold).
l
Dial
+k
9 0 plus extension number of station to
receive parked call.
To retrieve direct hold call,
l
From the hold receiving extension, Dial # 9 0.
l
From the station which placed call on hold,
-
Dial
*
4 plus the extension number of hold
recelvlng
statlon.
CALL PARK
To park a call with Park button (user programmed
programmable button),
l
Press
Park
button. Light associated with button will
turn on.
To manually park a call,
l
While on line, press
ITCM.
l
Dial
Q.
l
Dial a park orbii access code
(91
-
99).
NOTE:
lf
a parked call is not retrieved within a
programmable limit (0 -6 minutes, O-never
recalls), it reverts to the parking station as a
standard held call.
To
retrieve
parked call wlth Park button (user
programmed programmable button),
l
Press lighted Park button.
To manually
retrieve
a parked call,
l
From any extension, press
ITCM.
l
Dial
i.
l
Dial a park orbii access code
(91-99).
TRANSFERRING CALLS
SCREENEDTRANSFER
To
transfer a call to another statlon In the system,
l
Answer outside call (Do not press HOLD.)
l
Press
TRANSKONF.
(Outside call is placed on
hold automatically.)
l
Dial extension number of party
to
be transferred to
(or press DSS button for one-button intercom
calling).
l
When intercom patty answers, announce call and
line number.
l
Hang up handset.