Filter
Top Products
System’Operation
IMI 66-083
SERVICE OBSERVING
A station can be programmed by system class of
service to allow the user to monitor a conversation at
another station in an
un-announced
and
muted
manner.
l
Press ITCM.
l Dial # 03.
. Dial extension number of station to be monitored.
l
Monitor the in-progress call.
To end observation,
l
Press MNTR (SPKR).
EXECUTIVE OVERRIDE
A station can be programmed by system class of
.
service to allow the user to break into a conversation
at another station.
.
l
Make an intercom call, and hear busy signal.
Dial
+
03. A warning tone will sound at the called
station.
Join in-progress call.
ACCOUNT CODE OPERATION
Account codes are assigned by SMDA class of service
programming and are used by the system to identify
calls by category, or special grouping, for SMDA call
reporting purposes. Enter an account code while on
line either before an outgoing call is dialed, after the
distant party has hung up, or during a call. Account
code entry is voluntary. If it is not entered, an
outgoing call will still go through or an incoming one
can still be completed. To enter an account code, first
either dial the entry code or press an ACCOUNT
CODE button (if one is assigned by class of service
programming). After doing this, dial the account code
number.
OUTGOING CALL
WITHOUT ACCOUNT CODE BUTTON
Select line. Display on LCD speakerphone will
prompt for account code entry if feature is active.
Press
ITCM
*
0 4. Line is automatically placed on
hold.
Dial account code. Listen for dial tone. If error tone
sounds or error message shows on LCD, check
account code for validly and re-enter correct code.
Dial number to be called.
WITH ACCOUNT CODE
BUlTON
l
Select line. Display on LCD speakerphone will
prompt for account code entry if feature is active.
l
Press
ACCOUNT
CODE button. Associated LED
will flash while system awaits account code entry. It
will turn off when account code is entered. It will
also turn off after 10 seconds with no account code
entry or if button is pressed a second time (to void
entry requirement).
Dial account code number. If error tone sounds or
error message shows on LCD, check account code
for validly and re-enter correct code.
Dial number to be called.
INCOMING CALL
WITHOUT ACCOUNT CODE
Bull-ON
l
Answer call.
l
Press
ITCM
+#
0 4. Incoming call is automatically
placed on hold.
l
Dial account code. lf error tone sounds or error
message shows on LCD, check account code for
validity and re-enter correct code.
l
Press line button to return to call.
WlTH ACCOUNT CODE BUTTON
l
Answer call.
l
Press ACCOUNT CODE button and dial account
code number anytime during call. If error tone
sounds or error message shows on LCD, check
account code for validity and re-enter correct code.
NOTE:
The
ACCOUNT CODE button will on/y work
when account codes have been programmed
by SMDA class of service programming.