Filter
Top Products
Press
ITCM
?#
# 7 4 6
+k
for base level.
‘EATURE DESCRIPTION ENTRY CODE AND PROMPTING DISPLAY
Jon-Square System:
Every
)rogrammable buttons at each digital
;tations can be assigned individually
mapped) to select any line assigned to
hat station or to provide other functions.
rhese buttons can be assigned as direct
;tation select (DSS) buttons to provide
tuick access to system stations or
Issigned as idle to provide autodial
juttons for station the user. Idle buttons
31,B2,
andB3orA14,A15andAl6
ierve as dynamic line buttons. These
juttons allow the system to temporarily
assign
a line appearance to a station
which
normally does not have that line
assigned to it. That line will appear at a
jynarnic line button. While the line is in
appearance there, any normal call
landling operations can be performed.
defer to
Flgure
4-l
on page 4-50 for
Uton
locations.
Default
Button Asslgnments
hsslgn
Llnes To Buttons
Assign Lines To Buttons
-
Continued
-
.
on next page
1. Dial 56.
“BUTTON MAPPING
”
2.
Dial
01.
“BUTTON DEFAULT
”
3. Select station ports to be defaulted:
-
Station 10
-
57: Dial 10
-
57.
3. Dial
*
for next button mapping feature.
-OR-
Dial
t
f
for configuration mode.
1. Dial 56.
“BUTTON MAPPING
’
2. Dial 02.
“ASSIGN LINE
n
3. Select button to be programmed:
-
Press Al
-
A14,
Bl
-
B8.
4.
Select
line ports to be assigned.
-
Line port 1-14 = Dial
01
-
14
or Press
Al
-
A14.
-Lineport15,16=Dial15,16orPressBl,B2
-
Line port 17
-
24 = Dial 17
-
24.
.
-OR-
Press
HOLD
then press
Al
-
A8.
5. Repeat steps 3 and 4 until all
‘.
s:
are assigned.
REFERENCE RECORD
SEE CHART ON PAGE 4- 49
I
I
Press SPKR to end.
I