Filter
Top Products
STATION CONFIGURATION
lark the desired selections in the charts to record programming needs. (Make copies of the pages to provide additional records if needed.
Mditional records may be needed when add-on expansion modules are employed to extend the station capacity of a base unit.) Dial the feature
zode and then dial the selection code or press the programrnfng button to program the selection.
NOTE: A current
provided
&
rugram setting is indicated by a lighted LED next to the programming button for that selection.
When a foggle (onhrr) action is
y a sing/e button, the lighted LED indicates an active feature. When programming without
a
console, repeat
the procedure to disable
a
feafure at a keypad selected station.
Station port selection is made by dialing a selection number on the keypad per the following reference chart.
STA
KEYPAD BUTTONS
IO-57
10-57
FEATURE DESCRIPTION
ENTRY CODE AND PROMPTING DISPLAY
REFERENCE RECORD
Base Level: The
first step In any
programming sequence is to ehter the
base level. Once in this mode, any
desired configuration can be set.
Press
ITCM
Dial
*
# 7 4 6
G+
Statlon Default:
The station
1. Dial 56. “STATION DEFAULT
”
configuration features, described in the
2. Dial 66 to defauft station ports system-wide.
following procedures, can be defaulted to
-OR-
a standard
Set
Of
Vd.leS.
These
Vth3S
3.
Select
station
poti
to
be
defaulted:
will provide satisfactory system
-
Station
10
-
57: Dial 10
-
57.
performance in a broad range of site
4. Dial
%
for additional stations to default.
applications.
-OR-
Dial
*
%
for configuration mode.
1
PressSPKR
toend.
1
I I