Filter
Top Products
System Operation
IMI
66-083
MAKING CALLS
OUTSIDE LINE CALLING
l
Press line button to select line.
NOTE: Selecting a line is not necessary if:
l
A priority line has been assigned to a telephone (prime
line feature enabled).
l
The telephone automatically picks an idie line for use
when the handset is lifted (idle line preference feature
enabled).
l
Listen for dial tone.
l
Dial number.
When
party answers,
l Lii handset.
To
end call,
l
Hang up handset.
LINE GROUP ACCESS
If the system provides line groups,
l
Press
ITCM.
l
Dial line group access code
9 = line group 1
81 = line group 2
82 = line group 3
83 = line group 4
l
Listen for dial tone.
l Dial number.
LINE AND LINE GROUP QUEUING
When a line or line group is busy, a station can be
placed in a queue to await the availability of it.
To queue for a busy line,
l Press HOLD.
l
Press line button of busy line. A short tone burst
will sound. When line is free, station will sound
several quick tone bursts.
To queue for a busy line group,
l
Press
ITCM.
l
Dial line group access code
(9.81,82,83).
l
Hear busy tone.
Dial
G#
8 and hang up. When line group is free,
station
will
sound
several quick tone bursts.
Lii handset, hear line dial tone, and place call.
To cancel queuing,
Press
ITCM.
Dial
# 8, and hang up.
INTERCOM CALLING
Intercom calls may be manually dialed or
automatically dialed using a preprogrammed Direct
Station Selection (DSS) button.
VOICE CALLING
To voice call an Intercom statlon,
l
Lift handset.
l
Press
ITCM.
l
Dial extension number. (To call system operator,
dial 0.)
l
Speak to called party.
To voice call a DSS number,
l Lii handset.
l
Press programmable button that is programmed for
desired station.
l
Speak to called party.
NOTE: The outside line is automatically placed on
hold when a DSS button is pressed or when
the ITCM button is pressed prior to manually
dialing an intercom extension number.
TONE CALLING
To tone call an Intercom statlon,
l Lii handset.
l
Press
ITCM.
l
Dial extension number.
l
Press
ITCM
again. Called telephone will ring.
NOTE: Some systems may be programmed to tone
signal as the first option. Pressing ITCM a
second time is not necessary in this case
5-2