Filter
Top Products
System Bperation
IMI 66-083
SECTION 2
AlTENDANT
STATION OPERATION
The attendant station provides additional operating features that are not available from other stations in the
system.
SYSTEM CLOCK
The system clock can be programmed to maintain
current date and time information . This information is
provided to the LCD speakerphone for display.
1. Press ITCM.
2.
Dial%#O
1. .
3.
Dial two digits (00-99) for yr.
4. Dial two digits (01-12) for mo.
5.
Dial two digits (01-31) for day.
6.
Dial two digits (00-23) for hr.
7.
Dial two digits (00-59) for min.
8. Press MNTR (SPKR) to end.
SYSTEM SPEED DIAL PROGRAMMING
A special system-wide list of numbers can be
programmed for automatic dialing by all users.
1.
2.
3.
.4.
5.
Press ITCM
Dial
+i+
# 0 2.
Dial 01
-
99 to chose storage location.
Dial #to clear current entry.
Choose line to be used:
l
Dial 90 for no line assignment (system will
choose last line used at calling station or prime
line if one is assigned to calling station).
l
Press buttons
Al
-
Al4 for lines 1-14 or dial
01
-
14.
l
Press buttons
Bl
, B2 for lines
15,16
or dial 15,
16.
l
Press HOLD then press buttons
Al
-
A8
for
lines 17
-
24 or dial 17
-
24.
l
Dial
91
-
94 for line groups 1
-
4.
l
Press
ITCM
for intercom line.
6.
Dial the number to be stored (32 digits maximum).
l
Press HOLD to store pause (if required).
l
Press TAP to store flash (if required).
7.
Press
TRANSEONF
to save number.
8.
Repeat steps 3
-
7 to store next number.
9.
Press
MNTR (SPKR)
to end.
NIGHT TRANSFER (of ringing)
The day, or normal, ringing assignments of incoming
lines can be transferred to a particular station or
stations (these line/station ringing assignments are
chosen through class of service programming) for
off-hour or special-purpose answering. Additionally,
stations can be arranged through class of service
programming, to be able to answer any ringing outside
line. This line answer from any station action. is also
enabled
with
the night transfer (of ringing).
1. Press ITCM.
3. Press
Al
(top, left-hand programmable button) to
toggle feature on or off. Associated light will turn
on when night transfer is active and turn off when it
is inactive.
OR
l
Dial 1 to enable (Al LED turns on).
l
Dial 2 to disable (Al LED turns off).
4. Press MNTR (SPKR) to
end.
NOTE: When this feature is on, the ITCM light will
flash.
2. Dial
+l+
# 0 3.
5-14