Filter
Top Products
I
I
I
Press ITCM
+k
# 7 4 6
+k
for base level.
I
FEATURE DESCRIPTION
ENTRY CODE AND PROMPTING DISPLAY
Voice Mall Port:
Connect the
ExecuMail
system or a model 2500
industry-standard telephone to a
station
port
through the Analog
Terminal Interface
(ATI)
device.
Use this programming feature to
enable the station port for
ExecuMail
operation (voice mail port). Disable the
station port as a voice mail port when
used for model 2500 telephone
operation.
NOTE: This feature is
automatMy
disabled if the ATI device is
replaced with a multiline
telephone at the programmed
station port.
ATI
Dlstlnctlve Rlnglng:
Intercom
calls that ring at equipment connected
through an ATI device have a different
cadence than outside calls have.
Intercom ring cadence is: 1 sec. on, 0.5
sec. off, 1 sec. on, 3.5 sec. off.
Outside call
ring
cadence is: 2 sec. on,
4 sec. off. Disable this distinctive.
tinging feature to make the intercom
ring cadence the same as that for
outside calls.
1. Dial 53.
“STATION FEATURES”
2. Dial 32.
“VOICE MAIL PORT
”
3. Select station ports to be programmed
-
Station 10
-
57: Dial
10
-
57
4. Dial
+#
for
next feature.
-OR-
Dial
+K
+
for configuration mode.
1. Dial 53.
“STATION FEATURES”
2. Dial 33.
“D/ST.
RlNG
ON
”
3. Press
Al
to toggle between enable and disable
(LED On
=
Enable)
-OR-
4. Dial
1
to Enable.
(Al LED on)
Dial 2 to Disable.
5. Dial
+K
for next feature.
-OR-
“DIST.
RING ON
”
“DIST.
RING OFF
”
Dial
+K
+
for configuration mode.
REFERENCE RECORD
TRY1
PC
25 I
I
41
I
I57
I
DEFAULT = NOT ENABLED
1
Press SPKR to end.