Filter
Top Products
lMl66-083
Description Of System Feat,.
‘.
programming provides a station with the ability to
originate a message waiting signal and is used to
create a central message desk.
MODULAR WIRING AND JACKSR- OR
4-CONDUCTOR
WIRE SYSTEM
The system can be completely interconnected by
employing industry standard 50-pin connectors and
modular plug/jack combinations. Station wiring is
small, 2conductor, twisted-pair cable throughout the
system. A
4conductor
twisted-pair cable can be
employed if a spare pair is required for a separate
wiring purpose.
MUSIC INTERFACE
J
EXTERNAL SOURCE
REQ
IRED)
A jack is provided on the common equipment for the
connection of a customer-provided music source.
Also refer to the discussions titled: Background Music
and Music-On-Hold.
MUSIC-ON-HOLD
Music is provided to outside lines that are placed on
hold if an external music source is connected to the
system. Refer to the discussion titled: Music
Interface.
MUSIC-ON-HOLD SYSTEM-WIDE
ENABLE/DISABLE
Music is provided to outside lines that are placed on
hold if an external music source is connected to the
system. Musicon-hold can be disabled system-wide
by attendant action.
Also see discussions titled:
Music Interface and Music-On-Hold.
MUTE
Each station has a MUTE button which, when pressed,
will mute the handset transmitter (or internal
microphone on speakerphones) to prevent the user’s
voice from being heard by the distant party. The
MNTR (SPKR) light flutters to indicate a muted
condition. The button provides push-on/push-off
operation on speakerphones. No class of service is
required. Also refer to the discussion titled: Handsfree
Answer Inhibit.
NIGHT TRANSFER (OF RINGING)
Night transfer (of ringing) is an attendant-controlled
feature that transfers the day ringing program of all
incoming calls to a particular station or stations for
off-hour or special purpose answering. The nfght
transfer mode can only be activated from station 10 or
12. The individual lines at each station that are to be
transferred with this feature are selected by station
class of service programming.
ON-HOOK DIALING
Every station provides manual and/or automatic dialing
while the station handset is on-hook. An internal
speaker monitors call progress for completion. (The
handset must be taken off-hook to provide the voice
link on non-speakerphone stations.)
ORIGINATING DENIED
The ability to originate calls on certain lines can be
denied at individual stations through system
programming. The originating denied feature is
programmed on a per station/per line basis.
Originating denied does not prevent a user from
answering a ringing line, retrieving a held call or
receiving a transferred call. Call origination on a line is
denied at a particular station by the station class of
service programming.
PBWCENTREWCO COMPATIBLE
System features and programmable buttons support
the requirements of most PBXs, Central Offices, and
CENTREX systems. Numbers, # ‘s, s’s,
programmable pauses, and flash signals can be made
a part of every stored number for access to host
system feature codes.
PERSONALIZED RINGING TONE
This feature allows a station user to choose one of four
diierent ring tones to aid in distinguishing one ringing
station from another.
POOLED LINE ACCESS
(GROUP LINE ACCESS)
’
Users can dial a special access code instead of
pushing a line button to access one of up to four
different groups of lines. Lines are arranged into
groups with the line class of service programming.
POWER FAILURE TRANSFER
A power failure line connection is available for
connecting industry-standard telephones such as a
Comdial model 2500. The power-fail telephone is
automatically connected directly to a certain line
whenever there is an AC power failure. Normal
origination and reception of calls on a power-fail
station is possible during the power failure condition.
The power-fail stations will automatically disconnect as
soon as power is restored.
PRIME LINE AUTOMATIC
If a station is programmed for prime line automatic, the
designated outside line, intercom line or line group will
be automatically selected when the handset is taken