Filter
Top Products
TAB080
DiqiTech
Software Enhancement
FEATURE
Dual
Console
Feature
-
continued
BENEFIT
STATION 10 PROGRAMMING
To program a station port for the second-console feature,
1.
Press ITCM and dial
*
# 7 4 6
++
COW/G.
MODE
2.
Dial 53 for station features. STATION FEATURES
3. Dial 34 for second console.
SECOND CONSOLE
4. Assign console to station.
-
Type console port number then type station port number that console
is to be assigned to.
5. Press SPKR (MNTR) to end.
To clear a second-console feature assignment,
1.
Repeat steps 1 through 3 above.
2. Type console port number twice.
3.
Press
SPKR
(MNTR) to end.
VDT PROGRAMMING
To program a station port
for the
second-console feature,
1. Type I
+#
7 4 6
++
and press RETURN
2. Type 3, RETURN for Station COS.
3. Type 10, RETURN for Miscellaneous Feature Programming.
4. Type 20, RETURN for Assign Second DSS Console to a Station.
5. Type 1, RETURN to assign second DSS console to a station.
6. Type console port number.
7. Type station port number of assigned station.
To
clear a
second-console
feature,
1. Repeat steps 1 through 5 above.
2. Type 0, RETURN to clear previous assignment.
3. Type console port number.
PROGRAMMING CLARIFICATION
The programming clarification is per the following discussion.
CLARIFICATION
DESCRIPTION
Button Mapping
When programming the button mapping on a DigiTech telephone using a DigiTech 77OOS-xx LCD
With
DiglTech
speakerphone as the programming station, press buttons Al
-
Al4 and
Bl
-
83 to select those same
7700~xx LCD
buttons on the telephone being mapped. Because the DigiTech 77OOS-xx LCD speakerphone does
Speakerphones
not provide buttons B4 through B8, dial 103
-
107 to select buttons B4
-
88 on the telephone being
mapped.
3