Filter
Top Products
k&s
ITCM % # 7 4 6
+k
for base level.
FEATURE DESCRIPTION
Jrlme Llne (also prlme group or prime
ntercom):
A preprogrammed group of
ines, an intercom line, or one individual
ine can be designated to a particular
;tation
where it is automatically selected
or use when that station is taken
>ff-hook.
Flexlble Rlnglng Asslgnments:
Ringiry
assignments are programmed on a per
station/per line basis. Ringing is
controlled for every line that has
appearance at a station. Immediate, or
direct, ringing can be assigned to some
lines and delayed ringing to others.
NOTE: Do not program direct ringing
for lines that are assigned to
direct department calling.
See page 4- 18.
ENTRY CODE AND PROMPTING DISPLAY
REFERENCE RECORD
3a. Assign
prime line.
“PRIME
LINE
XX
”
-Lineporti-14=DialOl
-14orpressAl -A14
-Lineport15,16=Dial15,16orpressBl,B2.
-Lineport17-24=Dial17-24
-OR-
Press
HOLD
then press
Al
-
A6
lb. Assign prime group,
-
Dial 51-54 for gps. l-4.
“PRIME L/NE GRP X
k.
Assign prime intercom,
-
Dial 56 for intercom line.
“PRIME INTERCOM
1. Select station ports to be programmed:
-
Station 10
-
57: Dial
10
-
57.
i. Dial
t
for next prime line, group, or
intercom assignment.
-OR-
Press
*
t
for next station feature.
-OR-
Press
If
+k
If
for next station feature
I. Dial 53.
“STATION FEATURES”
MARK STATION/LINE RECORD
0N
PAGE 4 40
m
!. Dial 15.
“PRIME LINE
”
DEFAULT
=
NONE ASSIGNED
3lrect Rlnglng
I. Dial 54.
!. Dial
1.
“STAILINE
CONFIG.”
“DIRECT RING
”
3. Select line ports for direct ringing:
-
Line port 1-14
=
Dial 01
-
14 or press Al
-
Al4
-
Line port 15, 16
=
Dial
15,16
or press
Bl
,
82.
-
Line port 17
-
24
=
Dial 17
-
24
-OR-
Press
HOLD
then press
Al
-
A6
1.
Dial
f
when all line ports are selected.
5.
Select station ports to be programmed:
-
Station 10
-
57: Dial
10
-
57.
3.
Dial
*
when all station ports are selected.
-OR-
Dial
t
t
for next station/line ringing assignment
-OR-
Dial
t
+#
t
for configuration mode.
MARK STATION/LINE RECORD ON PAGE 4
B
40
DEFAULT
=
ALL LINES DIRECT RING AT
STATION PORTS 10 AND 17
Continued on next page
Press SPKR to end.