Filter
Top Products
Installing and Configuring Telephony
Manager
2-64
19. Choose the OK button.
Depending on your version of Windows, Connect or the Pumpware
Module verifies the PassageWay link. While the PassageWay link is
verified, the mouse arrow becomes an hourglass. When Connect or
the Pumpware Module is finished verifying the link, the hourglass
becomes an arrow again. The PassageWay link verification message
box remains on your screen. Proceed to Step 20.
20. If you are using Windows 95, click on the Connect button on the
bottom of your screen to open the Connect window, and then select
Exit from the File menu in Connect to close Connect.
If you are using Windows NT, select Exit from the File menu in the
Pumpware window to close the Pumpware Module.
The View README File dialog box appears. If you want to view the
Readme file now, make sure the check box is selected. (This check
box is selected by default.) If you do not want to view the Readme file
now, make sure the check box is not selected.
21. Choose the Finish button.
If the
Readme file
check box was selected, the Notepad window
appears, displaying the contents of the Readme file. Proceed to
Step 22.
If the
Readme file
check box was not selected, the About To Restart
Windows message box appears. Proceed to Step 23.
22. When you are finished reading the Readme file, select
Exit
from the
File menu to close the Notepad window.
NOTE:
If you have any other Notepad windows open, you must close
all of them now. The installation will not continue until all
Notepad windows are closed.
The About To Restart Windows message box appears.