Filter
Top Products
Installing and Configuring Telephony
Manager
2-36
If you do not use the Auto Config button, you will use the Phone Line
dialog box to specify the location and type for each call appearance
on your telephone. You can specify the following types of call
appearances:
Primary Line, which is the extension of your telephone.
Bridged Line, which is the extension of another person’s telephone
to which you have full access (that is, you can “bridge” onto calls
appearing at that person’s telephone).
Monitored Line, which is the extension of another person’s telephone
for which you can monitor the status (that is, in use, on hold, or
inactive).
4. Perform one of the following steps:
If you want to manually configure the PassageWay Configurator,
proceed to Step 5.
If you want to automatically configure the PassageWay Configurator,
perform the following steps:
a. If you have a Callmaster VI telephone, proceed to Step c.
If you do not have a Callmaster VI telephone, choose the button
where the Next button is located on your telephone.
A submenu appears.
b. Choose Next.
The Next label appears on the button you selected.
c. Choose the Auto Config button.
The PASTE Requirements dialog box appears, stating the
requirements for using this feature. If your system meets the
requirements, proceed to Step d. Otherwise, choose the Cancel
button and proceed to Step 5 to manually configure the
PassageWay Configurator.