Filter
Top Products
Installing and Configuring Telephony
Manager
2-53
If your company has a DEFINITY G3 V5 or later system, the
PassageWay Configurator can automatically download the following
information for your telephone from the DEFINITY system via the
Auto Config button:
the location and type (that is, primary line, bridged line, or
monitored line) of call appearances on your telephone.
the location of features assigned to buttons on your telephone.
the feature access codes for certain features that are not
programmed as buttons on your telephone.
If you want to configure your telephone automatically via the Auto
Config button, you must:
have a display telephone. However, you can use a non-display
telephone if your company’s DEFINITY System Manager administers
your extension as a display telephone. Consult your DEFINITY
System Manager. If you have a non-display telephone, you must also
use the Advanced Options dialog box to specify that your extension
has display capabilities even though your telephone does not have a
display
NOTE:
You cannot automatically download the configuration
information for your telephone if you have a 6402 telephone or
a 6402D telephone.
know the PASTE feature access code for your DEFINITY system.
You must contact your DEFINITY System Manager for this feature
access code.