Filter
Top Products
Installing and Configuring Telephony
Manager
2-8
any of the following telephones if you want to use Telephony Manager
with a DEFINITY system:
6400 Series telephones
7400 Series telephones
8400 Series telephones
Callmaster
®
Series telephones
NOTE:
A complete list of all the telephones supported by the
PassageWay Service Provider is provided in the PassageWay
Service Provider software (also known as the “PassageWay
Configurator”).
For caller ID capabilities, your telephone must have:
a display. However, you can use a non-display telephone for caller
ID capabilities if your company’s DEFINITY System Manager
administers your extension as a display telephone. Consult your
DEFINITY System Manager.
an Inspect button and a Normal button programmed. The Inspect
button is a display feature button that shows you call-related
information for an incoming call when you are already active on a
call. The Normal button is a display feature button that clears the
information displayed by the Inspect button. The Normal button is
not required if you have an 8411 telephone.