Filter
Top Products
Installing and Configuring Telephony
Manager
2-13
If your company’s DEFINITY system supports the PASTE feature, you only
need to know the following information to configure the PassageWay Service
Provider. (Use Appendix C to record this information.)
the type of telephone you have
the PASTE feature access code for your DEFINITY system
the location of the Next feature button administered on your telephone
if you have a 6400 Series telephone without a display, a 7400 Series
telephone, an 8400 Series telephone, or a Callmaster telephone other
than a Callmaster VI. If you have a Callmaster VI telephone or a 6400
Series telephone with a display, you do not need a Next feature button
administered on your telephone.
If your company’s DEFINITY system does not support the PASTE feature, you
must know the following information before installing the PassageWay Service
Provider:
the telephone number and type of call appearances on your telephone
(that is, primary, bridged, or monitored)
the location of call appearances on your telephone
the location of feature buttons on your telephone
NOTE:
If you have a 6400 Series telephone (other than a 6402 or
6402D), make sure your DEFINITY System Manager
programmed a Drop feature button on your telephone. Consult
your DEFINITY System Manager.
the access codes for the features you want to program on your
telephone. You can program the following features:
Auto Call Back On
Auto Call Back Off
Call Answer Back