Lucent Technologies Comcode 108239393 Telephone User Manual


 
Installing and Configuring Telephony
Manager
2-38
If you do not have a Callmaster VI telephone, the Phone Line
Information dialog box appears, displaying the locations of all
call appearances and feature buttons on your telephone. You
cannot change any of this information during this session. To
change this information, you must restart the PassageWay
Configurator. Proceed to Step h.
h. Choose the Continue button.
The Feature Access Codes dialog box appears, displaying the
feature access codes for your DEFINITY system. You cannot
change any of this information during this session. To change this
information, you must restart the PassageWay Configurator.
i. Choose the Continue button.
The PassageWay Configurator - Complete message box
appears.
j. Proceed to Step 16.
5. Choose the location of a call appearance on your telephone.
A submenu appears displaying “Clear Button,” “Primary Line,”
“Bridged Line,” “Monitored Line,” and “Cancel.”
NOTE:
Make sure you specify the correct location and type of each call
appearance on your telephone. If you incorrectly specify any of
this information, your system will not work as expected.
6. Choose the appropriate type of call appearance for the selected
button.
If you select Clear Button, the programming (if any) and label (if
any) are removed from that button.
If you select Cancel, the submenu closes, and the programming for
the selected button is not changed.